Getting Started

First Steps

1. Create a MinkPolice user profile
2. Register the new trap
3. Insert 4x AA lithium batteries
   (Important: Please note that there is no warranty on damage caused by leaking battery fluid when using other battery types.)
4. Put on the lid
5. For MPX: wait until the booting process is finished with the LED light flashing pink once after blinking blue. For MP2/MP5/MP10: screw on the antenna
6. Place the magnet on the lid for MPX and on the red line for all older models.
7. You will hear one long beep
8. Wait approx. 60 seconds for two long confirmation beeps and the OK status in the user profile
9. For tilt sensors and feeding alarms: remove the magnet and wait for another OK
10. Mount the MinkPolice trap alarm on the trap and test it

Frequently Asked Questions

User Manuals

Contact Us

If you have any further questions or feedback, please send us an email on support[at]minkpolice.com. We normally respond within 24 hours.